Interior wall cladding from Fundermax HPL panels
The clothes make the man, and HPL panels from Fundermax make interior wall cladding. In cozy kitchens or sophisticated hotels: the durable HPL panels beautify the walls in both private and public spaces. In addition, the durable materials fulfill important functions such as fire protection or rear ventilation. Thanks to their classification in accordance with fire protection class EN 13501-1, Max Compact Interior panels are suitable for interior rooms subjected to heavy traffic. The m.look interior wall cladding is equally durable and has been officially approved as a wall cladding by the German Institute for Building Technology (DIBt).
Interior design ideas for wall cladding
With high-quality HPL panels and a large selection of attractive decors and surfaces, the Max Compact Interior panels and m.look Interior product lines offer you a wide variety of design options for your wall cladding.
Harmonious combination: in kitchens, the back wall and the countertop surface are often designed in the same decor. Wall cladding and worktops can be perfectly coordinated with Fundermax products like the Max Compact Interior panels.
Advantages of Fundermax wall claddings
The high-pressure laminates from Fundermax offer the following advantages, especially in rooms with heavy traffic where durable materials are required:
- Easy installation makes the system ideal for both small and large projects.
- A long-lasting, sustainable wall design
- Flexible, multi-dimensional construction and design options
- Fulfillment of European fire safety requirements according to building material classes EN13501-1 B - s1, d0 and A2 - s1, d0
- Ideal for use in new constructions and renovations
- Minimal component depth and clean connection joints with other building components
- Meets even the strictest hygiene standards
Max Compact panels for rear-ventilated wall cladding
The air circulation provided by the rear-ventilation ensures the perfect balance of temperature and humidity in the room. Max Compact panels with a black core are ideal for rear-ventilated wall cladding. The panels are installed on a substructure to prevent them from warping. Sufficient space must also be left for expansion. The joints between the panels can be closed if required.
Max Compact Interior panels can be fastened to wooden or aluminum substructures in the following ways:
- - Visible: fastening with screws or rivets
- - Hidden: mounting with hanging rails made of wood or aluminum profiles
Assembly tip: Holes in Max Compact Interior panels should be pre-drilled one thread smaller.
Further installation instructions for Max Compact Interior panels
System wall cladding from Fundermax
The hygiene requirements in public buildings such as hospitals, nursing and retirement homes, educational buildings, kindergartens, laboratories and shopping centers are continually increasing. For this reason, it is necessary to install the wall cladding system either without rear ventilation or using a substructure system.
All Max Compact Interior panels and m.look Interior panels are suitable for such installations. If certain conditions are met, it is also possible to install the panels on drywall, concrete or brickwork:
- - The moisture content of the wall must not exceed 1%.
- - A vapor-tight, self-adhesive aluminum vapor barrier, model Alujet SE Tape PE, must be applied to the subsurface.
- - The substructure and mounting distances are in accordance with the specifications and system specifications of the respective manufacturer.
- - There must be a space of at least 5 mm between the panel edges and end profiles or door frames.
- - The joints must be adapted to the respective format at the panel joints.
